1 | CHAN, T.L., LIU, S.Y. and YUE, Y., “Nanoparticle Formation and Growth in Turbulent Flows Using the Bimodal TEMOM”, Powder Technology, Vol. 323, pp.507-517 (2018). |
2 | LIU, H.M. and CHAN, T.L., “Differentially Weighted Operator Splitting Monte Carlo Method for Simulating Complex Aerosol Dynamic Processes”, Particuology, Vol. 36, pp.114-126 (2018). |
3 | LIU, H.M. and CHAN, T.L., “Two-component Aerosol Dynamic Simulation Using Differentially Weighted Operator Splitting Monte Carlo Method”, Applied Mathematical Modelling, Vol. 62, pp.237-253 (2018). |
4 | XIA, Y., LIN, J.Z., KU, X.K. and CHAN, T.L., “Shear-induced Autorotation of Freely Rotatable Cylinder in a Channel Flow at Moderate Reynolds number”, Physics of Fluids, Vol.30, AN.: 043303, 18pp (2018). |
5 | TANG, X.P., ZOU, C.F., YAO, K., CHEN, G.H., LIU, B.Y., HE, Z.W. and GAO, F.R., “A Fast Estimation Algorithm for Lithium-ion Battery State of Health”, Journal of Power Sources, Vol. 396, pp.453-458 (2018). |
6 | WANG, W., HU, D.P., PAN, Y.Q., NIU, L.J. and CHEN, G.H., “Multiphase Transport Modeling for Freeze-drying of Aqueous Material Frozen with Prebuilt Porosity”, International Journal of Heat and Mass Transfer, Vol. 122, pp.1353-1365 (2018). |
7 | GAO, M., BAO, Y.B., QIAN, Y.X., DENG, Y.F., LI, Y.W. and CHEN, G.H., “Porous Anatase-TiO2(B) Dual-Phase Nanorods Prepared from in Situ Pyrolysis of a Single Molecule Precursor Offer High Performance Lithium-Ion Storage”, Inorganic Chemistry, Vol. 57, No. 19, pp.12245-12254 (2018). |
8 | DENG, Y.F., WANG, S.X., ZHOU, Y.B., QIAN, Y.X., QIN, X.S. and CHEN, G.H., “The Enhancement of Rate and Cycle Performance of LiMn2O4 at Elevated Temperatures by the Synergistic Roles of Porous Structure and Dual-cation Doping”, Journal of Applied Electrochemistry, Vol. 48, No. 10, pp.1083-1094 (2018). |
9 | LIU, Y.M., QIN, X.Y., ZHANG, S.Q., LIANG, G.M., KANG, F.Y., CHEN, G.H. and LI, B.H., “Fe3O4-Decorated Porous Graphene Interlayer for High-Performance Lithium-Sulfur Batteries”, ACS Applied Materials & Interfaces, Vol. 10, No. 31, pp.26264-26273 (2018). |
10 | WANG, W., YANG, J., HU, D.P., PAN, Y.Q., WANG, S.H. and CHEN, G.H., “Experimental and Numerical Investigations on Freeze-drying of Porous Media with Prebuilt Porosity”, Chemical Physics Letters, Vol. 700, pp.80-87 (2018). |
11 | ZHUANG, H., XIE, Y., TAN, H.Q., DENG, Y.F., LI, Y.W. and CHEN, G.H., “CoFex-CoFe2O4/N-doped Carbon Nanocomposite Derived from in Situ Pyrolysis of a Single Source Precursor as a Superior Bifunctional Electrocatalyst for Water Splitting”, Electrochimica ACTA, Vol. 262, pp.18-26 (2018). |
12 | LEI, C.J., WANG, F.F., YANG, J., GAO, X.F., YU, X.Y., YANG, B., CHEN, G.H., YUAN, C., LEI, L.C. and HOU, Y., “Embedding Co2P Nanoparticles in N-Doped Carbon Nanotubes Grown on Porous Carbon Polyhedra for High-Performance Lithium-Ion Batteries”, Industrial & Engineering Chemistry Research, Vol. 57 No. 39, pp.13019-13025 (2018). |
13 | ZHANG, M.M., LI, X.Y., FAN, S.Y., ZENG, L.B., YIN, Z.F., LIAN, T.T. and CHEN, G.H., “Highly Oriented SnS2/RGO/Ag Heterostructures for Boosting Photoeletrochemical and Photocatalytic Performances via Schottky and RGO-n Dual-heterojunctions Interfacial Effects”, Applied Catalysis A-General, Vol. 563, 118-126 (2018). |
14 | ZOU, K.X., DENG, Y.F., CHEN, J.P., QIAN, Y.Q., YANG, Y.W., LI, Y.W. and CHEN, G.H., “Hierarchically Porous Nitrogen-doped Carbon Derived from the Activation of Agriculture Waste by Potassium Hydroxide and Urea for High-performance Supercapacitors”, Journal of Power Sources, Vol. 378, pp.579-588 (2018). |
15 | LIANG, G.M., QIN, X.Y., ZOU, J.S., LUO, L.Y., WANG, Y.Z., WU, M.Y., ZHU, H., CHEN, G.H., KANG, F.Y. and LI, B.H., “Electrosprayed Silicon-embedded Porous Carbon Microspheres as Lithium-ion Battery Anodes with Exceptional Rate Capacities”, Carbon, Vol. 127, pp.424-431 (2018). |
16 | LUO, L.Y., QIN, X.Y., WU, J.X., LIANG, G.M., LI, Q., LIU, M., KANG, F.Y., CHEN, G.H. and LI, B.H., “An Interwoven MoO3@CNT Scaffold Interlayer for High-performance Lithium-sulfur Batteries”, Journal of Materials Chemistry A, Vol. 6, pp.8612-8619 (2018). |
17 | ZHANG, L.T., DAMBOURNET, D., IADECOLA, A., BATUK, D., BORKIEWICZ, O.J., WIADEREK, K.M., SALAGER, E., SHAO, M.H., CHEN, G.H. and TARASCON, J.M., “Origin of the High Capacity Manganese-Based Oxyfluoride Electrodes for Rechargeable Batteries”, Chemistry of Materials, Vol. 30, No. 15, pp.5362-5372 (2018). |
18 | LI, P. and CHENG, L., “Shear Horizontal Wave Propagation in a Periodic Stubbed Plate and Its Application in Rainbow Trapping”, Ultrasonics, Vol. 84, pp.244-253 (2018). |
19 | SHAN, S.B., CHENG, L. and WEN, F.Z., “Characterization of the Second Harmonic Lamb Waves with a Refined Nonlinear Parameter”, ASME Transaction: Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, Vol. 1, pp.011004-1 (2018). |
20 | SHAN, S.B., CHENG, L. and WEN, F.Z., “Design of Non-Linear-Lamb-Wave-Based Structural Health Monitoring Systems with Mitigated Adhesive Non-linearity”, Smart Materials and Structures, Vol. 27, Vol. 105006, 13pp (2018). |
21 | ZHANG, C., CHENG, L., QIU, J.H. and WANG, H.Y., “Damage Detection Based on Sparse Virtual Element Boundary Measurement Using Metal-core Piezoelectric Fiber”, Structural Health Monitoring: An International Journal, Vol. 17, No. 1, pp.15-23 (2018). |
22 | ZHOU, T. and CHENG, L., “A Resonant Beam Damper Tailored with Acoustic Black Hole Features for Broadband Vibration Reduction”, Journal of Sound and Vibration, Vol. 430, pp.174-184 (2018). |
23 | ZIAJA-SUJDAK, A., CHENG, L., RADECKI, R. and STASZEWSKI, W.J., “Near-field Wave Enhancement and ‘Quasi-surface’ Longitudinal Waves in a Segmented Thick-walled Hollow Cylindrical Waveguide”, Structural Health Monitoring: An International Journal, Vol. 17, No. 2, pp.346-362 (2018). |
24 | CAO, S.C., OUYANG, H.J. and CHENG, L., “Baseline-free Multi-damage Identification in Plate-like Structures by Using Multi-scale Approach and Low-rank Modelling”, Structural Control and Health Monitoring, Vol. e2923 (2018). |
25 | MA, L., ZHANG, S. and CHENG, L., “A 2D Daubechies Wavelet Model on the Vibration of Rectangular Plates Containing Strip Indentations with a Parabolic Thickness Profile”, Journal of Sound and Vibration, Vol. 429, pp.130-146 (2018). |
26 | FANG, H.B., YU, X. and CHENG, L., “Reconfigurable Origami Silencers for Tunable and Programmable Sound Attenuation”, Smart Materials and Structures, Vol. 27, No. 095007, 13pp (2018). |
27 | HU, Z.Y., MAXIT, L. and CHENG, L., “Piecewise Convergence Behavior of the Condensed Transfer Function Approach for Mid-to-high Frequency Modelling of a Panel-Cavity System”, Journal of Sound and Vibration, Vol. 435, pp.119-134 (2018). |
28 | LIU, Y., DU, J.T. and CHENG, L., “Analytical Coupled Vibro-acoustic Modeling of a Cavity-Backed Duct-membrane System with Uniform Mean Flow”, J. Acoust. Soc. Am., Vol. 144, No. 3, pp.1368-1380 (2018). |
29 | HUANG, W., JI, H.L., QIU, J.H. and CHENG, L., “Analysis of Ray Trajectories of Flexural Waves Propagating over Generalized Acoustic Black Hole Indentations”, Journal of Sound and Vibration, Vol. 417, pp.216-226 (2018). |
30 | JI, H.L., LUO, J., QIU, J.H. and CHENG, L., “Investigations on Flexural Wave Propagation and Attenuation in a Modified One-dimensional Acoustic Black Hole Using a Laser Excitation Technique”, Mechanical Systems and Signal Processing, Vol. 104, pp.19-35 (2018). |
31 | XIAO, Z.L., SHAN, S.B., WEN, F.Z. and CHENG, L., “Identification of Cascade Dynamic Nonlinear Systems: A Bargaining Game Theory Based Approach”, IEEE Transactions on Signal Processing, Vol. 66, No. 17, pp.4657-4669 (2018). |
32 | JI, H.L., CHEN, Z.N., QIU, J.H., WU, Y.P. and CHENG, L., “Super-harmonic Vibration and Its Reduction in SSD Control by Increase of Voltage Inversion Time”, Smart Materials and Structures, Vol. 27, No. 085007, 13pp (2018). |
33 | GHADIKOLAEI, M.A., CHEUNG, C.S. and YNG, K.F., “Study of Combustion, Performance and Emissions of a Diesel Engine Fuelled with Diesel/Biodiesel/Alcohol Blends having the Same Oxygen Concentration”, Energy, Vol. 157, pp.258-268 (2018). |
34 | WEI, L., CHEUNG, C.S. and NING, Z., “Effects of Biodiesel-ethanol and Biodiesel-butanol Blends on the Combustion, Performance and Emissions of a Diesel Engine”, Energy, Vol. 155, pp.957-970 (2018). |
35 | LI, X.L., ZHENG, Y., GUAN, C., CHEUNG, C.S., HUANG, Z., “Effect of Biodiesel on PAH, OPAH, and NPAH Emissions from a Direct Injection Diesel Engine”, Environmental Science and Pollution Research, Vol. 25, pp.34131-34138 (2018). |
36 | CHIANG, Y.K. and CHOY, Y.S., “Acoustic Behaviors of the Microperforated Panel Absorber Array in Nonlinear Regime under Moderate Acoustic Pressure Excitation”, J. Acoust. Soc. Am., Vol. 143, pp.538-549 (2018). |
37 | FEI, C.W., CHOY, Y.S., BAI, G.C. and TANG, W.Z., “Multi-feature Entropy Distance Approach with Vibration and Acoustic Emission Signals for Process Feature Recognition for Rolling Element Bearing Faults”, Structural health monitoring, Vol. 16, No. 3, pp.1-13 (2018). |
38 | LU, B., CHU, H.K., HUANG, K. and CHENG, L., “Vision-Based Surgical Suture Looping Through Trajectory Planning for Wound Suturing”, IEEE Transactions on Automation Science and Engineering, pp.1-15 (2018). |
39 | MENG, B., FU, M.W. and SHI, S.Q., “Deformation Characteristic and Geometrical Size Effect in Continuous Manufacturing of Cylindrical and Variable-thickness Flanged Microparts”, J. Mater. Process. Techno., Vol. 252, pp.546-558 (2018). |
40 | WANG, J.L., FU, M.W., SHI, S.Q. and KORSUNSKY, A.M., “Influence of Size Effect and Plastic Strain Gradient on the Springback Behaviour of Metallic Materials in Microbending Process”, Int. J. Mech. Sci., Vol. 146, pp.105-115 (2018). |
41 | GUO, J., ZHAN, M., FU, M.W., GAO, P.F. and MA, F., “Extrapolation Based Constitutive Modeling of Flow Stress of Titanium Alloy Sheet under Hot-working Condition”, Mater. & Design, Vol. 154, pp.96-107 (2018). |
42 | MA, J., LI, H., WANG, D., FU, M.W. and TAO, Z.J., “Tribological Behaviors in Titanium Sheet and Tube Forming at Elevated Temperatures: Evaluation and Modeling”, Int J of Adv Manuf Tech, Vol. 79, pp.657-674 (2018). |
43 | MAO, M.Y., PENG, L.F., FU, M.W. and LAI, X.M., “Co-effect of Microstructure and Surface Constraints on Plastic Deformation in Micro-and Mesoscaled Forming Process”, Int J of Adv Manuf Tech, Vol. 98, No. 5-8, pp.1861-1886 (2018). |
44 | SHANG, X., CUI, Z. and FU, M.W., “A Ductile Fracture Model Considering Stress State and Zener–Hollomon Parameter for Hot Deformation of Metallic Materials”, Int. J. Mech. Sci., Vol. 144, pp.800-812 (2018). |
45 | SUN, B., LIN, J. and FU, M.W., “Dependence of Processing Window and Microstructural Evolution on Initial Material State in Direct Electric Resistance Heat Treatment of NiTi Alloy”, Mater. & Design, Vol. 139, pp.549-564 (2018). |
46 | WANG, X.X., ZHAN, M., FU, M.W., GAO, P.F., GUO, J. and MA, F., “Microstructure Evolution of Ti-6Al-2Zr-1Mo-1V Alloy and Its Mechanism in Multi-pass Flow Forming”, J. Mater. Process. Techno., Vol. 261, pp.86-97 (2018). |
47 | XU, W.F., LUO, Y.X. and FU, M.W., “Microstructure Evolution in the Conventional Single Side and Bobbin Tool Friction Stir Welding of Thick Rolled 7085-T7452 Aluminum Alloy”, Materials Characterization, Vol. 138, pp.48-55 (2018). |
48 | ZHAN, M., GUO, J., FU, M.W., LI, R., GAO, P.F., LONG, H. and MA, F., “Formation Mechanism and Control of Flaring in forward Tube Spinning”, Int. J. of Adv. Manuf. Tech., Vol. 94, No. 1-4, pp.59-72 (2018). |
49 | ZHAN, M., GUO, J., FU, M.W., GAO, P.F., LONG, H. and MA, F., “Formability Limits and Process Window Based on Fracture Analysis of 5A02-O Aluminium Alloy in Splitting Spinning”, J. Mater. Process. Techno., Vol. 257, pp.15-32 (2018). |
50 | ZHENG, J.Y., YANG, H.P., FU, M.W. and NG, C., “Study on Size Effect Affected Progressive Microforming of Conical Flanged Parts Directly Using Sheet Metals”, revised for publication in J. Mater. Process. Techno., Vol. 257, pp.15-32 (2018). |
51 | PENG, L., XU, Z., GAO, Z. and FU, M.W., “A Constitutive Model for Metal Plastic Deformation at Micro/Meso Scale with Consideration of Grain Orientation and Its Evolution”, Int. J. Mech. Sci., Vol. 138, pp.74-85 (2018). |
52 | SUN, C.Y., CONG, Y.P., ZHANG, Q.D., FU, M.W. and LI, L., “Element Diffusion Model with Variable Coefficient in Bimetallic Bonding Process”, J. Mater. Process. Techno., Vol. 253, pp.99-108 (2018). |
53 | XU, W., LUO, Y., ZHANG, W. and FU, M.W., “Comparative Study on Local and Global Mechanical Properties of Bobbin Tool and Conventional Friction Stir Welded 7085-T7452 Aluminum Thick Plate”, J. of Mater. Sci. & Tech., Vol. 34, No. 1, pp.173-184 (2018). |
54 | ZHANG, H., LIU, J., SUI, D., CUI, Z. and FU, M.W., “Study of Microstructural Grain and Geometric Size Effects on Plastic Heterogeneities at Grain-level by Using Crystal Plasticity Modeling with High-fidelity Representative Microstructures”, Int. J. of Plasticity, Vol. 100, pp.69-89 (2018). |
55 | JIAO, Z.B. and SCHUH, C.A., “Nanocrystalline Ag-W Alloys Lose Stability upon Solute Desegregation from Grain Boundaries”, Acta Materialia, Vol. 161, No. 194 (2018). |
56 | GAO, L, SONG, J., JIAO, Z.B., LIAO, W., LUAN, J., SURJADI, J.U., LI, J., ZHANG, H., SUN, D., LIU, C.T. and LU, Y., “High‐Entropy Alloy (HEA)‐Coated Nanolattice Structures and Their Mechanical Properties”, Advanced Engineering Materials, Vol. 20, pp.1700625 (2018). |
57 | YANG, T., ZHAO, Y.L., TONG, Y., JIAO, Z.B., WEI, J., CAI, J.X., HAN, X.D., CHEN, D., HU, A., KAI, J.J., LU, K., LIU, Y. and LIU, C.T., “Multicomponent Intermetallic Nanoparticles and Superb Mechanical Behaviors of Complex Alloys”, Science, Vol. 362, pp.933-937 (2018). |
58 | DAI, H.H., JING, X.J., SUN, C., WANG, Y. and YUE, X.K., “Accurate Modeling and Analysis of a Bio-inspired Isolation System: With Application to On-orbit Capture”, Mechanical Systems and Signal Processing, Vol. 109, pp.111-133 (2018). |
59 | DAI, H.H., JING, X.J., WANG, Y., YUE, X.K. and YUAN, J.P., “Post-capture Vibration Suppression of Spacecraft via a Bio-inspired Isolation System”, Mechanical Systems and Signal Processing, Vol. 105, pp.214-240 (2018). |
60 | HU, F.Z. and JING, X.J., “A 6-DoF Passive Vibration Isolator Based on Stewart Structure with X-shaped Legs”, Nonlinear Dynamics, Vol. 91, No. 1, pp.157-185 (2018). |
61 | PAN, H.H., JING, X.J. and SUN, W., “Analysis and Design of a Bio-inspired Vibration Sensor System in Noisy Environment”, IEEE/ASME Trans Mechanics, Vol. 23, No. 2, pp.845-855 (2018). |
62 | PAN, H.H., JING, X.J., SUN, W.C. and GAO, H.J., “A Bio-inspired Dynamics-Based Adaptive Tracking Control for Nonlinear Suspension Systems”, IEEE Transactions on Control Systems Technology, Vol. 26, No. 3, pp.903-914 (2018). |
63 | QIAN, J.G. and JING, X.J., “Wind-driven Hybridized Triboelectric-Electromagnetic Nanogenerator and Solar Cell as a Sustainable Power Unit for Self-powered Natural Disaster Monitoring Sensor Networks”, Nano Energy, Vol. 52, pp.78-87 (2018). |
64 | WANG, H. and JING, X.J., “An Optimized Virtual Beam based Event-Oriented Algorithm for Multiple Fault Localization in Vibrating Structures”, Nonlinear Dynamics, Vol. 91, Issue 4, pp.2293-2318 (2018). |
65 | LI, M., ZHOU, J.J. and JING, X.J., “Improving Low-Frequency Piezoelectric Energy Harvesting Performance with Novel X-structured Harvesters”, Nonlinear Dynamics, Vol. 94, No. 2, pp.1409-1428 (2018). |
66 | LIU, Y.W., CHEN, J.B., LIU, J.G. and JING, X.J., “Nonlinear Mechanics of Flexible Cables in Space Robotic Arms Subject to Complex Physical Environment”, Nonlinear dynamics, Vol. 94, No. 1, pp.649-667 (2018). |
67 | LI, L., LU, Z., LIU, X.L., SUN, T., JING, X. and SHANGGUAN, W.B., “Modeling and Analysis of Friction Clutch at a Driveline for Suppressing Car Starting Judder”, Journal of Sound and Vibration, Vol. 424, pp.335-351 (2018). |
68 | FAN, H.K.H., LEUNG, R.C.K., LAM, G.C.Y., AURÉGAN, Y., and DAI, X.W., “Numerical Coupling Strategy for Resolving In-Duct Elastic Panel Aeroacoustic/Structural Interaction”, AIAA Journal, Vol. 56, No. 12, pp.5033-5040 (2018). |
69 | LAM, G.C.Y. and LEUNG, R.C.K., “Aeroacoustics of NACA 0018 Airfoil with a Cavity”, AIAA Journal, Vol. 56, No. 12, pp. 4775-4786 (2018). |
70 | LEUNG, W.W.F., HAU, W.Y. and CHOY, H.F., “Microfiber-nanofiber Composite Filter for High-efficiency and Low Pressure Drop under Nano-aerosol Loading”, Sep. & Purif. Tech. J, Vol. 206, pp.26-38 (2018). |
71 | LEUNG, W.W.F. and CHOY, H.F., “Transition from Depth to Surface Filtration for a Low-skin Effect Filter Subject to Continuous Loading of Nano-aerosols”, Sep & Puri Tech, Vol. 190, pp.202-210 (2018). |
72 | LEUNG, W.W.F. and CHOY, H.F., “Transition from Depth to Surface Filtration for a High-efficiency, High-skin Effect, Nanofiber Filter under Continuous Nano-aerosol Loading”, Chem. Eng. Sci., Vol. 182, pp.67-76 (2018). |
73 | KANJWAL, M., LEUNG, W.W.F. and CHRONAKIS, I., “Composite Nanofibers and Photocatalytic Degradation of Dairy Effluent”, Sep. & Purif. Tech. J, Vol. 192, pp.160-165 (2018). |
74 | KANJWAL, M., LEUNG, W.W.F. and CHRONAKIS, I., “Composite Nanofibers and Photocatalytic Degradation of Dairy Effluent”, Sep. & Purif. Tech. J, Vol. 192, pp.160-165 (2018). |
75 | LI, Y. and LEUNG, W.W.F., “Introduction of Graphene Nanofibers into the Perovskite Layer of Perovskite Solar Cells”, Chemsuschem, Vol. 11, pp.2921-2929 (2018). |
76 | SUN, Q.Q. and LEUNG, W.W.F., “Charged PVDF Multi-layer Filters with Enhanced Filtration Performance for Filtering Nano-aerosols”, Sep. and Purif. Tech. J., Vol. 212, pp.854-876 (2018). |
77 | LIU, Y., “The Consistence between Signalling Molecular Pathways and Traditional Chinese Medicine Therapeutic Strategies”, In BASIC & CLINICAL PHARMACOLOGY & TOXICOLOGY, Vol. 123, pp.17-17 (2018). |
78 | YANG, X.L. and LIU, Y., “An Improved k–ω–φ–α Turbulence Model Applied to Near-all, Separated and Impinging Jet Flows and Heat Transfer”, Computers and Mathematics with Applications, Vol. 76, Issue 2, pp.315-339 (2018). |
79 | LIN, C., CHEN, S., XIAO, L. and LIU, Y., “Tuning Drop Motion by Chemical Chessboard-patterned Surfaces: A Many-body Dissipative Particle Dynamics Study”, Langmuir, Vol. 34, No. 8, pp.2708-2715 (2018). |
80 | NAVARRO-ALARCON, D., ZAHRA, O., TREJO, C., OLGUIN-DIAZ, E. and PARRA-VEGA, V., “Computing Pressure-Deformation Maps for Braided Continuum Robots”, Frontiers in Robotics and AI, pp.1-8 (2018). |
81 | NAVARRO-ALARCON, D. and LIU, Y.H., “Fourier-Based Shape Servoing: A New Feedback Method to Actively Deform Soft Objects into Desired 2-D Image Contours”, IEEE Transactions on Robotics (T-RO), Vol. 34, No. 1, pp.272-279 (2018). |
82 | YIP, H.M., WANG, Z., NAVARRO-ALARCON, D., LI, P., CHEUNG, T.H., GREIFFENHAGEN, C. and LIU, Y.H., “A Collaborative Robotic Uterine Positioning System for Laparoscopic Hysterectomy: Design, Modeling and Experiments”, International Journal of Medical Robotics and Computer Assisted Surgery, pp.1-37 (2018). |
83 | WAN, J.B., RUAN, H.H., WANG, X. and WAN, J.Q., “Investigating Relaxation of Glassy Materials Based on Natural Vibration of Beam: A Comparative Study of Borosilicate and Chalcogenide Glasses”, Journal of Non-Crystalline Solids, Vol. 500, pp.181-190 (2018). |
84 | WAN, J.Q., RUAN, H.H., WANG, J.B. and SHI, S.Q., “The Kinetic Diagram of Sigma Phase and Its Precipitation Hardening Effect on 15Cr-2Ni Duplex Stainless Steel”, Materials Science and Engineering: A, Vol. 711, pp.571-578 (2018). |
85 | LIN, C., WAN, J.Q. and RUAN, H.H., “Phase Field Modeling of Widmanstätten Ferrite Formation in Steel”, Journal of Alloys and Compounds, Vol. 769, pp.620-630 (2018). |
86 | WAN, J.Q., LOU, Y. and RUAN, H.H., “The Partition Coefficient of Alloying Elements and Its Influence on the Pitting Corrosion Resistance of 15Cr-2Ni Duplex Stainless Steel”, Corrosion Science, Vol. 139, pp.13-20 (2018). |
87 | YANG, S., GAO, Z., RUAN, H.H., GAO, C., WANG, X., SUN, X. and WEN, X., |
88 | YANG, X.S., ZHAI, H.R., RUAN, H.H., SHI, S.Q. and ZHANG, T.Y., “Multi-temperature Indentation Creep Tests on Nanotwinned Copper”, International Journal of Plasticity, Vol. 104, pp.68-79 (2018). |
89 | ZHOU, T.F., ZHOU, Q., XIE, J.Q., LIU, X.H., WANG, X.B. and RUAN, H.H., “Elastic-viscoplasticity Modeling of the Thermo-mechanical Behavior of Chalcogenide Glass for Aspheric Lens Molding”, International Journal of Applied Glass Science, Vol. 9, pp.252-262 (2018). |
90 | CUI, L., SHI, S.Q., WEI, G.S. and DU, X.Z., “Shear Deformation-induced Anisotropic Thermal Conductivity of Graphene”, Phys. Chem. Chem. Phys., Vol. 20, pp.951-957 (2018). |
91 | MA, H.L., ZHANG, X.Q., LAU, K.T. and SHI, S.Q., “Effect of Nanoclay Concentration on Lap Joint Shear Performance of Nanoclay/Epoxy Adhesive at Cryogenic Condition”, Journal of Composite Materials, Vol. 52, No. 18, pp.2477-2482 (2018). |
92 | XIAO, Z.H., HU, S.Y., LUO, J.L., SHI, S.Q., HENAGER, C.H. and Jr., “A Quantitative Phase-field Model for Crevice Corrosion”, Computational Materials Science, Vol. 149, pp.37-48 (2018). |
93 | LIU, W.B., CHENG, P., YAN, J.Z., LI, N., SHI, S.Q. and ZHANG, S.C., “Temperature-induced Surface Reconstruction and Interface Structure Evolution on Ligament of Nanoporous Copper”, Scientific Reports, Vol. 8, Art No. 447 (2018). |
94 | ANSARI, T.Q., XIAO, Z.H., HU, S.Y., LI, Y.L., LUO, J.L. and SHI, S.Q., “Phase-field Model of Pitting Corrosion Kinetics in Metallic Materials”, npj Computational Materials, Vol. 4, No. 38 (2018). |
95 | DONG, X., LIU, W.B., CHEN, X., YAN, J.Z., LI, N., SHI, S.Q., ZHANG, S.C. and YANG, X.S., “Novel Three Dimensional Hierarchical Porous Sn-Ni Alloys as Anode for Lithium Ion Batteries with Long Cycle Life by Pulse Electrodeposition”, Chemical Engineering Journal, Vol. 350, pp.791-798 (2018). |
96 | YE, Y.F., ZHANG, Y.H., HE, Q.F., ZHUANG, Y., WANG, S., SHI, S.Q., HU, A., FAN, J. and YANG, Y., “Atomic-scale Distorted Lattice in Chemically Disordered Equimolar Complex Alloys”, Acta Materialia, Vol. 150, pp.182-194 (2018). |
97 | RADECKI, R., SU, Z., CHENG, L., PACKO, P. and STASZEWSKI, W.J., “Modelling Nonlinearity of Guided Ultrasonic Waves in Fatigued Materials Using a Nonlinear Local Interaction Simulation Approach and a Spring Model”, Ultrasonics, Vol. 84, pp.272-289 (2018). |
98 | LI, Y., LIAO, Y. and SU, Z., “Graphene-functionalized Polymer Composites for Self-sensing of Ultrasonic Waves: An Initiative towards “Sensor-free” Structural Health Monitoring”, Composites Science and Technology, Vol. 168, pp.203-213 (2018). |
99 | LI, Y., WANG, K. and SU, Z., “Dispersed Sensing Networks in Nano-engineered Polymer Composites: From Static Strain Measurement to Ultrasonic Wave Acquisition”, Sensors, Vol. 18, No. 5, pp.1398 (15pp) (2018). |
100 | LIU, M., SCHMICKER, D., SU, Z. and CUI, F., “A Benchmark Study of Modeling Lamb Wave Scattering by a through Hole Using a Time-domain Spectral Element Method”, ASME Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, Vol. 1, No. 021006, 8pp (2018). |
101 | WANG, K., FAN, Z. and SU, Z., “Orienting Fatigue Cracks Using Contact Acoustic Nonlinearity in Scattered Plate Waves”, Smart Materials and Structures, Vol. 27, No. 09LT01, 6pp (2018). |
102 | WANG, K., LIU, M., SU, Z., YUAN, S. and FAN, Z., “Analytical Insight into “Breathing” Crack-induced Acoustic Nonlinearity with an Application to Quantitative Evaluation of Contact Cracks”, Ultrasonics, Vol. 88, pp.157-167 (2018). |
103 | XU, H., ZHOU, Q., CAO, M., SU, Z. and WU, Z., “A Dynamic Equilibrium-based Damage Identification Method Free of Structural Baseline Parameters: Experimental Validation in a Two-dimensional Plane Structure”, Journal of Aerospace Engineering, Vol. 31, No. 6, pp04018081 (8pp) (2018). |
104 | ZHANG, Z., LIU, M., LIAO, Y., SU, Z. and XIAO, Y., “Contact Acoustic Nonlinearity (CAN)-based Continuous Monitoring of Bolt Loosening: Hybrid Use of High-order Harmonics and Spectral Sidebands”, Mechanical Systems and Signal Processing, Vol. 103, pp.280-294 (2018). |
105 | ALKAYEM, N.F., CAO, M., ZHANG, Y., BAYAT, M. and SU, Z., “Structural Damage Detection Using Finite Element Model Updating with Evolutionary Algorithms: A Survey”, Neural Computing and Applications, Vol. 30, pp.389-411 (2018). |
106 | LIU, M., WANG, Q., ZHANG, Q., LONG, R. and SU, Z., “Characterizing Hypervelocity (> 2.5 km/s)-impact-engendered Damage in Shielding Structures Using In-situ Acoustic Emission: Simulation and Experiment”, International Journal of Impact Engineering, Vol. 111, pp.273-284 (2018). |
107 | SUN, X., DING, X., LI, F., ZHOU, S., LIU, Y., HU, N., SU, Z., ZHAO, Y., ZHANG, J. and DENG, M., “Interaction of Lamb Wave Modes with Weak Material Nonlinearity: Generation of Symmetric Zero-frequency Mode”, Sensors, Vol. 18, No. 2451, 20pp (2018). |
108 | AHMAD, S., TANG, H. and YAO, H.M., “Oblique Impact of Two Successive Droplets on a Flat Surface”, International Journal of Heat and Mass Transfer, Vol. 119, pp.433-445 (2018). |
109 | KEFAYATI, G.H.R., TANG, H., CHAN, A. and WANG, X., “A Lattice Boltzmann Model for Thermal Non-Newtonian Fluid Flows through Porous Media”, Computers & Fluids, Vol. 176, pp.226-244 (2018). |
110 | KEFAYATI, G.H.R. and TANG, H., “MHD Mixed Convection of Viscoplastic Fluids in Different Aspect Ratios of a Lid-driven Cavity Using LBM”, International Journal of Heat and Mass Transfer, Vol. 124, pp.344-367 (2018). |
111 | KEFAYATI, G.H.R. and TANG, H., “Lattice Boltzmann Simulation of Viscoplastic Fluids on Natural Convection in an Inclined Enclosure with Inner Cold Circular/Elliptical Cylinders (Part III: Four Cylinders)”, International Journal of Heat and Mass Transfer, Vol. 123, pp.1182-1203 (2018). |
112 | KEFAYATI, G.H.R. and TANG, H., “Lattice Boltzmann Simulation of Viscoplastic Fluids on Natural Convection in an Inclined Enclosure with Inner Cold Circular/Elliptical Cylinders (Part II: Two Cylinders)”, International Journal of Heat and Mass Transfer, Vol. 123, pp.1163-1181 (2018). |
113 | KEFAYATI, G.H.R. and TANG, H., “Lattice Boltzmann Simulation of Viscoplastic Fluids on Natural Convection in an Inclined Enclosure with Inner Cold Circular/Elliptical Cylinders (Part I: One Cylinder)”, International Journal of Heat and Mass Transfer, Vol. 123, pp.1138-1162 (2018). |
114 | KEFAYATI, G.H.R. and TANG, H., “Mesoscopic Simulation of Double-diffusive Natural Convection and Entropy Generation of Bingham Fluid in an Open Cavity”, European Journal of Mechanics – B/Fluids, Vol. 69, pp.1-45 (2018). |
115 | KEFAYATI, G.H.R. and TANG, H., “Double-diffusive Natural Convection and Entropy Generation of Carreau Fluid in a Heated Enclosure with an Inner Circular Cold Cylinder (Part II: Entropy Generation)”, International Journal of Heat and Mass Transfer, Vol. 120, pp.683-713 (2018). |
116 | KEFAYATI, G.H.R. and TANG, H., “Double-diffusive Natural Convection and Entropy Generation of Carreau Fluid in a Heated Enclosure with an Inner Circular Cold Cylinder (Part I: Heat and Mass Transfer)”, International Journal of Heat and Mass Transfer, Vol. 120, pp.731-750 (2018). |
117 | KEFAYATI, G.H.R. and TANG, H., “MHD Thermosolutal Natural Convection and Entropy Generation of Carreau Fluid in a Heated Enclosure with Two Inner Circular Cold Cylinders, Using LBM”, International Journal of Heat and Mass Transfer, Vol. 126, pp.508-530 (2018). |
118 | KEFAYATI, G.H.R., TANG, H. and CHAN, A., “Immersed Boundary-finite Difference Lattice Boltzmann Model through Fluid-structure Interaction for Viscoplastic Fluids”, Journal of Fluids and Structures, Vol. 83, pp.238-258 (2018). |
119 | LI, L., TANG, H., WANG, J.Z., LIN, J. and YAO, H.M., “Rolling Adhesion of Cell in Shear Flow: A Theoretical Model”, Journal of the Mechanics and Physics of Solids, Vol. 119, pp.369-381 (2018). |
120 | WANG, C. and TANG, H., “Enhancement of Aerodynamic Performance of a Heaving Airfoil Using Synthetic-jet Based Active Flow Control”, Bioinspiration & Biomimetics, Vol. 13, pp.046005 (2018). |
121 | WANG, L., TANG, H. and WU, Y., “On a Submerged Wave Energy Converter with Snap-through Power Take-off”, Applied Ocean Research, Vol. 80, pp.24-36 (2018). |
122 | WEN, X., TANG, H. and LIU, Y., “Interaction of Twin Synthetic Jets in Attached and Separated Boundary Layers: Effects of Yaw Angle and Phase Difference”, Journal of Visualization, Vol. 21, pp.949-963 (2018). |
123 | WEN, X., LIU, Y. and TANG, H., “Unsteady Behavior of a Sweeping Impinging Jet: Time-resolved Particle Image Velocimetry Measurements”, Experimental Thermal and Fluid Science, Vol. 96, pp.111-127 (2018). |
124 | WEN, C.Y., SALDÍVAR MASSIMI, H. and SHEN, H., “Extension of CE/SE Method to Non-equilibrium Dissociating Flows”, Journal of Computational Physics, Vol. 356, pp.240-260 (2018). |
125 | HAO, J.A. and WEN, C.Y., “Numerical Investigation of Oxygen Thermochemical Nonequilibrium on High-Enthalpy Double-Cone Flows”, International Journal of Heat and Mass Transfer, Vol. 127, Part B, pp.892-902 (2018). |
126 | HAO, J.A. and WEN, C.Y., “Effects of Vibrational Nonequilibrium on Hypersonic Shock Wave/Laminar-Boundary-Layer Interactions”, International Communications in Heat and Mass Transfer, Vol. 97, pp.136-142 (2018). |
127 | SHEN, L. and WEN, C.Y., “Oscillations of Leading-Edge Vortex Breakdown Locations over a Delta Wing”, AIAA Journal, Vol. 56, No. 6, pp.2113-2118 (2018). |
128 | SHEN, H. and WEN, C.Y., “Theoretical Investigation of Shock Stand-off Distance for Non-equilibrium Flows over Spheres”, Chinese Journal of Aeronautics, Vol. 31, No. 5, pp.990-996 (2018). |
129 | ZHAO, R., WEN, C.Y., TIAN, X.D, LONG, T.H. and YUAN, W., “Numerical Simulation of Local Wall Heating and Cooling Effect on the Stability of a Hypersonic Boundary Layer”, International Journal of Heat and Mass Transfer, Vol. 121, pp.986-998 (2018). |
130 | GUAN, B., LIU, Y., WEN, C.Y. and SHEN, H., “Numerical Study on Liquid Droplet Internal Flow under Shock Impact”, AIAA Journal, Vol. 56, No. 9, pp.3382-3387 (2018). |
131 | GUAN, B., LEONG, K.P. and WEN, C.Y., “Detonation-Driven Fuel-Injection System for Supersonic Combustion Testing Facilities”, AIAA Journal, Vol. 56, No. 8, pp.3353-3357 (2018). |
132 | LI, H.H., KAO, C.Y. and WEN, C.Y., “Labyrinthine and Secondary Wave Instabilities of a Miscible Magnetic Fluid Drop in a Hele-Shaw Cell”, Journal of Fluid Mechanics, Vol. 836, pp.374-396 (2018). |
133 | SHEN, L., CHEN, Z.N. and WEN, C.Y., “Experimental Investigation of the Flow Structure over a Delta Wing via Flow Visualization Methods”, J. Vis. Exp., Vol. 134, pp.e57244 (2018). |
134 | SUN, J.X., LI, B.Y., WEN, C.Y. and CHEN, C.K., “Design and Implementation of a Real-Time Hardware-in-the-Loop Testing Platform for a Dual-Rotor Tail-Sitter Unmanned Aerial Vehicle”, Mechatronics, Vol. 56, pp.1-15 (2018). |
135 | UY, C.K., SHI, L.S. and WEN, C.Y., “Chemical Reaction Mechanism Related Vibrational Nonequilibrium Effect on the Zel’dovich-von Neumann-Döring (ZND) Detonation Model”, Combustion and Flame, Vol. 196, pp.174-181 (2018). |
136 | ZHAO, R., LIU, T., WEN, C.Y., ZHU, J. and CHENG, L., “Theoretical Modeling and Optimization of Porous Coating for Hypersonic-laminar-flow Control”, AIAA Journal, Vol. 56, No. 8, pp.2942-2946 (2018). |
137 | LI, B.Y., ZHOU, Y.F., SUN, J.X., WEN, C.Y. and CHEN, C.K., “Development of Model Predictive Controller for a Tail-sitter VTOL UAV in Hover Flight”, Sensors, Vol. 18, pp.2859 (2018). |
138 | ZHANG, Y.N., TENG, H.H., NG, H.D. and WEN, C.Y., “On the Transition between Different Initiation Structures of Wedge-induced Oblique Detonations”, AIAA Journal, Vol. 56, No. 10, pp.4016-4023 (2018). |
139 | XUE, X.P., NISHIYAMA, Y., NAKAMURA, Y., MORI K., WANG, Y.P. and WEN, C.Y., “High-Speed Unsteady Flows Past Two-Body Configurations”, Chinese Journal of Aeronautics, Vol. 31, No. 1, pp.54-64 (2018). |
140 | LUO, X.S., ZHANG, F., DING, J.C., SI, T., YANG, J.M., ZHAI, Z.G. and WEN, C.Y., “Long-term Effect of Rayleigh-Taylor Stabilization on Converging Richtmyer- Meshkov Instability”, Journal of Fluid Mechanics, Vol. 849, pp.231-244 (2018). |
141 | HUA, Y.Y., WONG, W.O. and CHENG, L., “Optimal Design of a Beam-based Dynamic Vibration Absorber Using Fixed-points Theory”, Journal of Sound and Vibration, Vol. 421, pp.111-131 (2018). |
142 | WEI, A., LIU, Q., YAO, H. and LI, Y., “Principles and Mechanisms of Strain-dependent Thermal Conductivity of Polycrystalline Graphene with Varying Grain Size and Surface Hydrogenation”, Journal of Physical Chemistry C, Vol. 122, pp.19869-19879 (2018). |
143 | LI, Y., WEI, A., YE, H. and YAO, H., “Mechanical and Thermal Properties of Grain Boundary in Planar Heterostructure of Graphene and Hexagonal Boron Nitride”, Nanoscale, Vol. 10, pp.3497-3508 (2018). |
144 | YIN, Q., GUO, Z., LI, Y. and YAO, H., “Computational Study on the Effects of Mechanical Constraint on the Performance of Si Nanosheets as Anode Material for Lithium-ion Batteries”, Journal of Physical Chemistry C, Vol. 122, No. 28, pp.16374-16379 (2018). |
145 | FU, J., ZHANG, H., GUO, Z., FENG, D.Q., THIYAGARAJAN, V. and YAO, H., “Combat Biofouling with Microscopic Ridge-like Surface Morphology: A Bioinspired Study”, J. Roy. Soc. Interface, Vol. 15, pp.20170823 (2018). |
146 | YANG, J., WANG, Y., LI, Y., GAO, H., CHAI, Y. and YAO, H., “Edge Orientations of Mechanically Exfoliated Anisotropic Two-dimensional Materials”, J. Mech. Phys. Solids, Vol. 112, pp.157-168 (2018). |
147 | MENG, Y., GUO, Z., FITZER, S.C., UPADHYAY, A., CHAN, V.B.S., LI, C., CUSACK, M., YAO, H., YEUNG, K.W.K. and THIYAGARAJAN, V., “Ocean Acidification Reduces Mechanical Properties of the Portuguese Oyster Shell with Impaired Microstructure: A Hierarchical Analysis”, Biogeosciences, Vol. 15, pp.6833–6846 (2018). |
148 | LI, Y., ZHANG, P. and KANG, N., “Linear Faraday Instability on a Viscous Droplet Immersed in another Inviscid Fluid”, Physical of Fluids, Vol. 30, pp.102104 (2018). |
149 | SUN, K., ZHANG, P., CHE, Z. and WANG, T., “Marangoni-flow-induced Partial Coalescence of a Droplet on a Liquid/Air Interface”, Physical Review Fluids, Vol. 3, pp.023602 (2018). |
150 | SUN, K., ZHANG, P., JIA, M. and WANG, T., “Collision-induced jet-like Mixing for Droplets of Unequal-sizes”, International Journal of Heat and Mass Transfer, Vol. 120, pp.218-227 (2018). |
151 | XIA, X. and ZHANG, P., “A Vortex-dynamical Scaling Theory for Flickering Buoyant Diffusion Flames”, Journal of Fluid Mechanics, Vol. 855, pp.1156-1169 (2018). |
152 | YU, D. and ZHANG, P., “Circulation-controlled Firewhirl with Differential Diffusion”, Combustion and Flame, Vol. 189, pp.288–299 (2018). |
153 | ZHANG, Z., ZHANG, P. and ZHAO, Z., “Cross-Impingement and Combustion of Sprays in High-Pressure Chamber and Opposed-piston Compression Ignition Engine”, Applied Thermal Engineering, Vol. 144, pp.137-146 (2018). |
154 | ZHANG, Z. and ZHANG, P., “Modelling Kinetic Energy Dissipation of Bouncing Droplets for Lagrangian Simulation of Impinging Sprays under High Ambient Pressures”, Spray and Atomization, Vol. 28, No. 8, pp.637-694 (2018). |
155 | ZHANG, D., HE, C., ZHANG, P. and TANG, C., “Mass Interminglement and Hypergolic Ignition of TMEDA and WFNA Droplets by Off-center Collision”, Combustion and Flame, Vol. 197, pp.276-289 (2018). |
156 | ZHU, X., XIA, X. and ZHANG, P., “Near-field Flow Stability of Buoyant Methane/Air Inverse Diffusion Flames”, Combustion and Flame, Vol. 191, pp.66-75 (2018). |
157 | MENG, Q., ZHAO, X., ZHANG, L., ZHANG, P. and SHENG, L., “A Theoretical Kinetics Study on Low-temperature Reactions of Methyl Acetate Radicals with Molecular Oxygen”, Combustion and Flame, Vol. 196, pp.66-75 (2018). |
158 | ZHANG, L., MENG, Q., CHI, Y. and ZHANG, P., “Toward High-Level Theoretical Studies of Large Biodiesel Molecules: An ONIOM [QCISD(T)/CBS:DFT] Study of the Reactions between Unsaturated Methyl Esters (CnH2n−1COOCH3) and Hydrogen Radical”, Journal of Physical Chemistry A, Vol. 122, pp.4882-4893 (2018). |
159 | YUE, L.Y., JIA, Y., XU, X., ZHANG, X. and ZHANG, P., “Effects of Cowl Shock on the Self-starting Characteristics of Hypersonic Inlets”, Aerospace Science and Technology, Vol. 74, pp.72-80 (2018). |
160 | T Ouyang, T Zhang, H Wang, F Yang, J Yan, K Zhu, K Ye, G Wang, LM Zhou, K Cheng, DX Cao, “High-throughput fabrication of porous carbon by chemical foaming strategy for high performance supercapacitor”, Chemical Engineering Journal 352, 459-468 (2018). |
161 | ZL Xu, S Lin, N Onofrio, LM Zhou, F Shi, W Lu, K Kang, Q Zhang, SP Lau, “Exceptional catalytic effects of black phosphorus quantum dots in shuttling-free lithium sulfur batteries”, Nature Communications 9 (1), 4164 (2018). |
162 | T Ouyang, K Cheng, F Yang, J Jiang, J Yan, K Zhu, K Ye, G Wang, LM Zhou, Dianxue Cao, “A general in-situ etching and synchronous heteroatom doping strategy to boost the capacitive performance of commercial carbon fiber cloth”, Chemical Engineering Journal, 335, 638-646 (2018). |
163 | J Zhang, Q Xie, Y Xie, LM Zhou, Z Wang, “Investigation of mechanical performances of composite bolted joints with local reinforcements”, Science And Engineering Of Composite Materials, 25 (1), 75-83 (2018). |
164 | LIU, T., LIANG, S., CHEN, F. and ZHU, J., “Inherent Losses Induced Absorptive Acoustic Rainbow Trapping with a Gradient Metasurface”, Journal of Applied Physics, Vol. 123, No. 9, pp.091702 (2018). |
165 | LIU, T., ZHU, X.F., CHEN, F., LIANG, S. and ZHU, J., “Parity-time Symmetry beyond One Dimension with All Passive Acoustic Metamaterials Crystal”, Physical Review Letters, Vol. 120, No. 12, pp.124502 (2018). |
166 | ZHAO, L., SHU, H., LIANG, S., SHI. X., AN, S., REN, W. and ZHU, J., “Torsional Wave Band Gap Properties in a Circular Plate of a Two-dimensional Generalized Phononic Crystal”, AIP Advances, Vol. 8, No. 5, pp.055317 (2018). |
Journals2020-01-08T16:48:32+08:00